Drop a CR3 RAW file from your Canon EOS R50 V and get the shutter actuation count in seconds — processed entirely in your browser, never uploaded anywhere.
Check Shutter Count →The Canon EOS R50 V is Canon's compact, vlog-oriented APS-C mirrorless camera. Building on the popular R50, the R50 V adds enhanced video features, improved autofocus tracking, and a fully articulating touchscreen — making it ideal for content creators and vloggers who also shoot stills.
| Model | Release | Sensor | Shutter Count Field | RAW Format |
|---|---|---|---|---|
| Canon EOS R50 V | 2025 | 24.2 MP APS-C | ImageCount (0x086D) | CR3 |
| Canon EOS R50 | 2023 | 24.2 MP APS-C | Offset 0x0D29 | CR3 |
| Canon EOS R100 | 2023 | 24.1 MP APS-C | Not confirmed | CR3 |
The R50 V does not show the image count in its on-screen menus. The counter is embedded in every CR3 RAW file.
For the most accurate count, use a file shot before formatting the card, as formatting may reset the ImageCount field.
Canon has not published an official shutter rating for the R50 V. As an entry-level body, use conservative thresholds.
| Image Count | Assessment |
|---|---|
| 0 – 10,000 | Very low use — near new |
| 10,000 – 30,000 | Low use — typical for casual shooters |
| 30,000 – 65,000 | Moderate to high use — uint16 max is 65,535 |
The ImageCount field is a uint16 value (max 65,535). For cameras with very high usage, the counter may have wrapped. Cross-reference with the camera's overall condition and service history.
The R50 V writes images in Canon's CR3 format. ShutterCount parses the ISOBMFF box hierarchy to find the EXIF MakerNote and reads the ImageCount field at byte offset 0x086D as a uint16 little-endian value.
This is the same offset and field type used by the Canon EOS R1 and R6 Mark III. It differs from the uint32 offset 0x0D29 used by the original R50.
No. The R50 V's electronic shutter does not engage the mechanical curtain and does not increment the ImageCount.
Shoot a CR3 RAW file and drop it into shuttercount.app. The ImageCount is read from offset 0x086D in your browser — no upload needed.
The ImageCount field (uint16 at 0x086D) may reset when the camera is formatted. For the most reliable reading, check a file taken before formatting.
The R50 stores its shutter count as a uint32 at offset 0x0D29, while the R50 V uses a uint16 ImageCount at 0x086D. The R50 V shares this counter type with the R1 and R6 Mark III. The R50 V also adds improved video features and a fully articulating screen.