Canon · Nikon · Sony · Fujifilm
🔒 No upload — 100% local

Sony RX10 IV Shutter Count:
Check It Free in Your Browser

ShutterCount cannot read a shutter count from Sony RX10 IV files. Sony’s compact (DSC) platform does not expose the counter in metadata that any public tool can decode — the tool still shows the file’s EXIF details (model, serial number, date, exposure settings), just no actuation count.

Check Shutter Count →

Sony RX10 IV — Shutter Rating

The Sony RX10 IV (DSC-RX10M4, 2017) is Sony's most capable fixed-lens camera, featuring a 20.1 MP 1-inch stacked BSI CMOS Exmor RS sensor with ultra-fast readout, a 24–600 mm equivalent Zeiss Vario-Sonnar T* lens, 24 fps continuous burst with real-time tracking AF, 4K HDR video, and a built-in ND filter. It is one of the best super-zoom cameras ever produced and a favourite among wildlife and sports photographers who need reach without carrying interchangeable lenses.

Sony does not publish an official rated shutter life for the RX10 IV. Based on community data, the compact mechanism is estimated at approximately 200,000 actuations. The shutter count is stored encrypted in MakerNote tag 0x9050 of every ARW RAW file.

ModelReleaseSensorEst. Shutter LifeRAW Format
Sony RX10 IV (DSC-RX10M4)201720.1 MP 1-inch stacked BSI~200,000 (est.)ARW
Sony RX100 VII (compact sibling)201920.1 MP 1-inch stacked BSI~200,000 (est.)ARW
Sony A6700 (ILC comparison)202326 MP APS-C200,000ARW
No official shutter rating: Sony does not publish a rated shutter life for the RX10 series. The ~200,000 estimate is derived from community reports. Wildlife and sports users may see higher counts from burst shooting.

How to Check Shutter Count on the Sony RX10 IV

ShutterCount cannot read a shutter count from Sony RX10 IV files. Sony’s compact (DSC) platform does not expose the counter in metadata that any public tool can decode — the tool still shows the file’s EXIF details (model, serial number, date, exposure settings), just no actuation count.

ShutterCount cannot read a shutter count from Sony RX10 IV files. Sony’s compact (DSC) platform does not expose the counter in metadata that any public tool — ExifTool included — can decode. If you drop a file from this camera into the tool, you will still see the EXIF details (model, serial number, date, exposure settings) — but no actuation count.

When buying a used Sony RX10 IV, judge it by overall condition instead: lens and zoom action, sensor dust or marks, battery health, body wear, and the seller’s shooting history.

JPEG files don't work: Sony strips MakerNote shutter count data from JPEG files on the RX10 series. You must use an ARW RAW file. If you normally shoot JPEG-only, temporarily switch to RAW mode to capture one frame for checking purposes.

What Is a Good Shutter Count for a Used Sony RX10 IV?

The RX10 IV is favoured by wildlife and sports photographers who frequently use the 24 fps burst mode. These use cases can accumulate actuations faster than casual photography. Always verify shutter count when buying used from active wildlife or sports shooters.

Actuation Count% of Est. LifeAssessment
0 – 10,0000 – 5 %Very low use — near new
10,000 – 40,0005 – 20 %Low use — plenty of life remaining
40,000 – 100,00020 – 50 %Moderate use — normal for active wildlife shooters
100,000 – 160,00050 – 80 %High use — negotiate price
160,000 +80 %+Heavy use — budget for potential shutter service

Why ShutterCount Cannot Read the Sony RX10 IV Shutter Count

The encrypted MakerNote block that holds the shutter count on Sony’s interchangeable-lens bodies (tag 0x9050) is not decodable for this model — no published offset exists for it, in this tool or in ExifTool. Rather than show a number that might be wrong, ShutterCount shows none.

This same encrypted structure applies across the full Sony ARW lineup — from the A1 flagship down to the RX10 IV super-zoom. After decryption, ShutterCount reads the 32-bit count from the appropriate byte offset within the decrypted block.

All processing is local. The decryption algorithm runs entirely in JavaScript in your browser. The ARW file is never transmitted to any server.

Does the built-in ND filter affect the shutter count?

No. The RX10 IV's built-in 3-stop ND filter controls exposure by reducing light reaching the sensor, not by changing the shutter mechanism. All exposures — with or without ND — still actuate the mechanical shutter the same way.

Sony RX10 IV Shutter Count — FAQ

How do I check the shutter count of my Sony RX10 IV?

ShutterCount cannot read a shutter count from Sony RX10 IV files. Sony’s compact (DSC) platform does not expose the counter in metadata that any public tool can decode — the tool still shows the file’s EXIF details (model, serial number, date, exposure settings), just no actuation count.

What is the shutter life of the Sony RX10 IV?

Sony does not publish an official shutter rating for the RX10 IV. Community estimates suggest approximately 200,000 actuations. This is an informal estimate, not a Sony specification.

Is the RX10 IV worth buying used?

Yes — the RX10 IV remains one of the best long-zoom cameras available. Key things to check beyond shutter count: lens zoom smoothness across the full 24–600 mm range, autofocus performance at maximum telephoto, 4K video quality, and built-in ND filter operation (two-position: in/out at 3 stops).

How does the RX10 IV compare to the RX10 III?

The RX10 IV added a dramatically improved autofocus system based on phase-detection AF with 315 focus points (vs contrast-detect only on the III), significantly faster burst tracking, and better subject acquisition. The optical zoom range and video specs are similar. For wildlife, the AF upgrade makes the IV far more usable.

Other Sony & Bridge Cameras