Drop a RAF RAW file from your Fujifilm X-S1 and get the exact shutter actuation count in seconds — processed entirely in your browser, never uploaded anywhere.
Check Shutter Count →The Fujifilm X-S1 (announced late 2011, released January 2012) is Fujifilm's enthusiast-level bridge camera from the early X-series era. It pairs a 12 MP 2/3-inch EXR CMOS sensor with a 26x optical zoom lens covering 24–624mm equivalent — a wide reach suited to wildlife, sports, and travel photography. Despite being a fixed-lens bridge camera, the X-S1 shoots in Fujifilm's RAF RAW format, giving it the image quality flexibility of a system camera while remaining an all-in-one package.
Fujifilm did not publish an official shutter rating for the X-S1. Based on its consumer bridge construction, the shutter is commonly estimated at around 100,000 actuations. The actuation counter is stored in the Fujifilm MakerNote embedded in each RAF file.
| Model | Release | Sensor | Est. Shutter Life | RAW Format |
|---|---|---|---|---|
| Fujifilm X-S1 | 2012 | 12 MP 2/3" EXR CMOS | ~100,000 | RAF |
| Fujifilm X10 (compact sibling) | 2011 | 12 MP 2/3" EXR CMOS | ~100,000 | RAF |
| Fujifilm X20 (X10 successor) | 2013 | 12 MP 2/3" EXR CMOS II | ~100,000 | RAF |
| Fujifilm X-T30 II (current APS-C) | 2022 | 26.1 MP APS-C X-Trans CMOS 4 | ~150,000 | RAF |
Alternatively, you can use ExifTool from the command line:
exiftool -ShutterCount yourfile.RAF
| Actuation Count | % of Est. Life | Assessment |
|---|---|---|
| 0 – 10,000 | 0 – 10 % | Very low use — near new |
| 10,000 – 30,000 | 10 – 30 % | Low use |
| 30,000 – 60,000 | 30 – 60 % | Moderate use — typical for an active bridge camera |
| 60,000 – 90,000 | 60 – 90 % | High use — negotiate price; shutter service approaching |
| 90,000 + | 90 %+ | Near or past estimated life — budget for shutter replacement |
The Fujifilm X-S1 writes RAF files using Fujifilm's proprietary RAW container, which includes a MakerNote block with camera-specific metadata. ShutterCount reads the actuation counter from within this MakerNote — the same method used for X-Trans and EXR cameras across the Fujifilm X-series line, including the X-T, X-Pro, X-E, and X-H families.
All processing happens locally in your browser. The RAF file is never transmitted anywhere.
Enable RAW shooting on your X-S1, take a photo, then drop the RAF file into shuttercount.app. The count is read from the Fujifilm MakerNote in your browser — no upload needed.
Fujifilm did not publish an official rating for the X-S1. Consumer bridge cameras in this class are generally estimated at around 100,000 actuations.
Yes. The X-S1 supports Fujifilm RAF RAW format — unusual for a bridge camera of its era. Use a RAF file for the most accurate shutter count reading; JPEG files from the X-S1 may also contain the counter in the MakerNote.
The Fujifilm X-S1 has a 26x optical zoom covering 24mm to 624mm equivalent, with a maximum aperture of f/2.8 at the wide end.