Canon · Nikon · Sony · Fujifilm
🔒 No upload — 100% local

X-T5 vs X-T4:
Shutter Count & Life Compared

How the Fujifilm X-T5 and Fujifilm X-T4 compare on rated shutter life, sensor and value — and how to read the exact actuation count of either from a RAW file, free and in your browser.

Check Your Shutter Count →

X-T5 vs X-T4 — Specs at a Glance

SpecX-T5X-T4
Full nameFujifilm X-T5Fujifilm X-T4
Released20222020
Sensor40.2 MP APS-C26.1 MP APS-C
CategoryAPS-C mirrorlessAPS-C mirrorless
RAW formatRAFRAF
Shutter typeMechanical + electronicMechanical + electronic
Rated shutter life300,000300,000

Shutter Life: X-T5 vs X-T4

Both bodies carry the same 300,000-actuation rating, so shutter durability is a wash — your buying decision comes down to sensor, features and price, not shutter wear.

Rated figures are manufacturer estimates, not hard limits. Many bodies shoot well past their rating, while a small number fail earlier — the rating is best read as a durability class, not a countdown. When buying used, what matters is the actual actuation count relative to that rating, which you can read for free below.

Which Is the Better Used Buy — X-T5 or X-T4?

The X-T5 is the newer design (2022 vs 2020), which usually means longer firmware support, a more current autofocus system and a stronger residual value — but also a higher used price.

On resolution the X-T5 leads at 40.2 MP APS-C against the X-T4’s 26.1 MP APS-C — worth having if you crop hard or print large, while the X-T4 keeps file sizes and low-light noise in check.

Because both are Fujifilm bodies, your existing lenses and accessories carry straight across — the decision is purely about the body itself.

Bottom line: neither shutter rating alone should decide it. Read the real actuation count of the specific body you are looking at, compare it against the rating in the table above, and factor any shutter-service cost into your offer.

How to Check the Shutter Count on Either Camera

Both cameras write RAF RAW files, and ShutterCount reads the actuation count from the MakerNote of each.

  1. Take any photo with the X-T5 or X-T4 and copy the RAW file (RAF/RAF) to your computer or phone.
  2. Open shuttercount.app in any modern browser (Chrome, Firefox, Safari, Edge).
  3. Drag the RAW file onto the drop zone, or click to pick it from a file dialog.
  4. The shutter count and remaining-life percentage appear instantly. Nothing is uploaded — the file is parsed on your device.

See the full model guides for each body: Fujifilm X-T5 shutter count and Fujifilm X-T4 shutter count.

X-T5 vs X-T4 — FAQ

Does the X-T5 or the X-T4 have the higher shutter count rating?

Both the Fujifilm X-T5 and the Fujifilm X-T4 are rated for 300,000 shutter actuations, so neither has a durability edge on paper.

How do I check the shutter count on a X-T5 or X-T4?

Take a photo, then drop the resulting RAF RAW file into shuttercount.app. The count is read from the file’s MakerNote entirely in your browser — no upload, no account.

Is a used X-T5 or X-T4 the better buy?

The X-T5 is newer (2022), which tends to mean better resale value and longer support; the X-T4 is often the better bargain used. Always verify the actual shutter count from an original RAW file before buying.

Can the shutter count be reset or faked on these cameras?

No. Only the manufacturer’s service centre can reset the hardware counter, and only after a physical shutter replacement. EXIF editors can rewrite surrounding metadata but cannot alter the in-camera counter, which is why you should always read it from an untouched RAF/RAF RAW file.

More Camera Comparisons

Compare shutter life and value across other popular bodies: