Straight answer first: the browser tool on this site cannot report an actuation total for the Fujifilm FinePix S2 Pro, and neither can ExifTool. That is not a gap in either reader — an S2 Pro RAF contains no lifetime shutter counter to find. What makes this body worth a page of its own is the near miss: the Nikon D100, announced the same year and built around the same F80 design, does report its count. Below is why that difference exists, what an S2 Pro file does tell you, and the one inspection that matters far more than a number on this camera.
What the file does tell you →Fujifilm announced the FinePix S2 Pro at the end of January 2002; DPReview's full review followed on 3 August 2002. It is the second of Fujifilm's Nikon-bodied professional DSLRs, and the most literal of them: a Nikon F80 (N80) film SLR, modified by Fujifilm, carrying Fujifilm's own Super CCD and electronics. The S3 Pro replaced it in 2004.
| Specification | Fujifilm FinePix S2 Pro |
|---|---|
| Announced / reviewed | Announced end of January 2002 · DPReview review dated 3 August 2002 |
| Sensor | 6.17 M-photodiode Super CCD, 23 × 15.5 mm, 3:2 — diagonally oriented photodiodes |
| Maximum image size | 4256 × 2848, interpolated to a 12 MP-equivalent output |
| Mount / body | Nikon F · a modified Nikon F80 (N80) film-SLR body |
| Shutter | 30 s – 1/4000 s, electronically controlled focal-plane · X-sync to 1/125 s |
| Continuous shooting | Approx. 2 fps, maximum 7 frames |
| Sensitivity | ISO 100–1600 |
| Storage | Dual slots — SmartMedia up to 128 MB, plus CompactFlash Type I/II with Microdrive support |
| Power | 4 × AA (NiMH recommended) and 2 × CR123A / DL123A lithium cells |
| Connectivity | USB (data storage) and IEEE 1394 FireWire (storage and tethered shooting) |
| Viewfinder / LCD | Optical pentaprism, 92 % coverage · 1.8-inch, 117,000-dot LCD |
| Weight | 850 g including batteries |
| RAW format | RAF, 12-bit CCD-RAW — carries no shutter counter, see below |
| Shutter durability | No figure published by Fujifilm — and no donor rating to borrow |
| Browser tool support | EXIF from the embedded image yes · actuation count no |
Everything in that table is a published specification except the last two rows, and those two are the reason this page exists.
Every manufacturer hides the counter somewhere different, and several never wrote one at all. Nikon uses MakerNote tag 0x00A7, Sony an enciphered 0x9050 block, Canon a CameraInfo blob inside the CR3's metadata track. Fujifilm's nearest equivalent is MakerNote tag 0x1438, ImageCount — and that is where the S2 Pro drops out of the story.
Tag 0x1438 is an X-series field, and the S2 Pro is a decade older. It is not merely absent from this 2002 camera: measurements for this site found it missing from Fujifilm's own first X-series generation too — the X100, X100S, X-Pro1, X-E1, X-S1, X10 and XF1, all from 2011–2013, return nothing for it, and ExifTool finds none in them either. A counter that had not settled into Fujifilm's MakerNote by 2013 was certainly not there in 2002.
So the parser reads the RAF and finds nothing to report. A RAF is a Fujifilm container holding a JPEG with full EXIF and the Fujifilm MakerNote; this parser locates that block, walks the MakerNote IFD and looks for 0x1438. On an X-T5 the value is there and the count appears. On an S2 Pro the tag is absent, so no number is shown — and no number is invented to fill the space.
ExifTool reaches the same conclusion by an independent route. Its FujiFilm tag tables contain no lifetime actuation counter at all. Two tags invite confusion and neither is one: 0x1032 ExposureCount is defined as the number of exposures used for the current image, which on an ordinary photograph reads 1; and ImageCount itself carries ExifTool's own warning that it may reset to 0 when new firmware is installed, so even on the modern bodies that write it, it is a count of images rather than a guaranteed lifetime total.
| Body / format | Where the count lives | Browser tool |
|---|---|---|
| FinePix S2 Pro RAF | Not written to the file at all | ✗ Nothing to read |
| Modern Fujifilm RAF (X-T5, X-H2, X-S20…) | MakerNote 0x1438 (ImageCount) | ✓ Read in the browser |
| Nikon D100 / D70 NEF (era equivalents) | MakerNote 0x00A7 | ✓ Read in the browser |
| Sony ARW | Enciphered MakerNote 0x9050 | ✓ Read in the browser |
With the later FinePix S5 Pro there is an irony to point at: its chassis donor, the Nikon D200, reports its count because Nikon writes 0x00A7 into every NEF. The S2 Pro's case is sharper still, because the comparison is not with a later cousin but with a camera from the same year.
Nikon announced the D100 in 2002 as a digital SLR based on the F80 — the same film body Fujifilm modified for the S2 Pro, though Nikon built its own shell around the design rather than reusing an F80 outright. Two 6 MP-class DSLRs, the same mount, the same ancestry, both on sale in the same season. Drop a D100 NEF into this tool today and the actuation count comes straight out. Drop an S2 Pro RAF in and it does not.
The chassis is not where the counter lives. A shared design supplies the shutter, the mirror box, the viewfinder and the autofocus module. The counter is a metadata decision, taken by whoever wrote the firmware that fills the MakerNote — and an S2 Pro writes a Fujifilm MakerNote, which ExifTool's MakerNote index lists for this body under the FujiFilm type. There is no Nikon block inside the file for a Nikon tool to read, so no Nikon utility, old or new, will get a count out of an S2 Pro photograph.
It is worth adding what the donor cannot do even in principle. The F80 itself is a 35 mm film SLR: it exposes frames onto film and writes no metadata of any kind. Unlike the S5 Pro and its D200, there is no digital file format anywhere in this camera's family tree to compare a count against — only the D100, which is a relative, not the same camera.
An S2 Pro file is not useless for checking a camera; it just answers different questions. Dropping one into shuttercount.app gives you the EXIF from the embedded image — the capture date and time and the exposure data — enough to confirm that a sample really was taken recently rather than dug out of an old folder. Everything runs in your browser and nothing is uploaded.
Two caveats specific to a body of this vintage, so you know what a blank field means:
0xA431 (BodySerialNumber), which arrived with EXIF 2.3 in 2010 — eight years after this camera shipped. Do not read its absence as a fault in the file.0x0010, InternalSerialNumber, is documented as unique for most models and as containing the camera model ID together with the date of manufacture. ExifTool decodes it, and on a camera this old the build date is genuinely useful context — it is the one hard number about the body's age you can get out of a photograph.On the desktop, these are the commands worth running on a sample file:
The first line gives you the body, when the frame was taken, and the internal serial with its manufacture date. The second is the honest test of everything on this page: on an S2 Pro file it returns nothing resembling a life total. Run the same command on a modern Fujifilm RAF and ImageCount appears — which is how you can satisfy yourself that the difference is in the camera, not in the command.
If your S2 Pro proves otherwise, we want the file. This conclusion rests on ExifTool's tag tables, on what the parser here looks for, and on this site's own measurements of later Fujifilm bodies — not on a bundled S2 Pro sample. No RAF from this camera has been through the validation corpus, and no RAF sample of any kind ships with the test suite. If some firmware revision of this body does write a counter somewhere, that is a support gap worth closing: send a straight-out-of-camera RAF to samples@shuttercount.app and this page gets corrected rather than quietly left wrong.
Not from a photograph, and this page is not going to pretend otherwise by printing a menu path it has not verified.
No actuation-counter entry in the S2 Pro's set-up menus could be confirmed for this page, and a button sequence published on a guess would be exactly the kind of confident invention this site exists to avoid. The route with no guesswork in it is a Fujifilm service centre, which can interrogate the body directly — though for a camera now two decades out of production, whether any service centre still handles it is a question to ask before paying for shipping. For almost every buyer the practical answer is the one two sections down: judge the camera, not the counter.
There is no manufacturer durability figure for the S2 Pro. Fujifilm did not publish one. Nor is there a donor rating to fall back on: the body is a Nikon F80, a consumer 35 mm film SLR, and Nikon published no shutter durability specification for it either.
Do not carry the S5 Pro's ~100,000 across to this body. That figure is not a Fujifilm number at all — it is Nikon's rating for the D200, applied to the S5 Pro because the S5 Pro is built on a D200. It describes a semi-professional digital mechanism, not the consumer film chassis under an S2 Pro.
This page therefore prints no number, not even an estimate, and that is a deliberate choice rather than an omission. A “~100,000 (est.)” here would look exactly like the S5 Pro's figure while doing none of the same work: it would be a guess about a consumer film body wearing the clothes of a specification. A number with a plausible shape and nothing behind it is worse than no number, because a buyer will act on it.
You will also find community shutter-life databases that aggregate self-reported S2 Pro figures. They are interesting reading and they are not a rating: the people who submit are self-selected, a failure and a still-working body are counted by different kinds of owner, and nothing in such a collection is traceable to a manufacturer test. No figure from one is quoted here.
You will notice that this page has no percentage-of-rated-life table, which most model pages on this site do have. There is nothing to compute a percentage against. What can be said is directional and honest: the S2 Pro's shutter is a consumer-grade unit from a film body, so it is prudent to expect less of it than of the S5 Pro's D200 mechanism, not more — and after twenty years, age matters more than use anyway.
If you are buying an S2 Pro in 2026, the shutter is not the part most likely to end the camera's life. The sensor is — and unusually for a camera this old, there is a documented, manufacturer-acknowledged reason.
On 4 October 2005 Fujifilm issued a service advisory covering the FinePix S2 Pro together with the FinePix A303, F410 and F700. Affected cameras could produce images that were completely black, carried a purplish cast, or showed multi-coloured distortions. Fujifilm's stated cause was a lack of uniformity in the quality of the CCD during a certain production period, which could surface in combination with usage or storage conditions and age deterioration. Fujifilm offered to repair affected cameras at no charge, even once the one-year warranty had expired.
The advisory listed S2 Pro serial ranges, read from the bottom of the camera, and applied to cameras imported to the USA:
| Affected S2 Pro serial ranges (US import) | Where to look |
|---|---|
| 31A127–31A143 · 32A000–32A039 · 33A000–33A007 · 34A000–34A004 | Bottom plate of the camera |
Treat that list as history, not as a clean bill of health. The free repair programme dates from 2005 and is long finished; replacement sensors for a 2002 CCD are not something to count on today; and the serial ranges covered US-market bodies, so a camera bought elsewhere is neither cleared nor condemned by them. The useful move is to test for the symptom rather than to look up the number — which is the first item in the list below.
The absence of a verifiable counter changes what a sensible inspection looks like. These are the checks that carry weight on this body:
InternalSerialNumber with ExifTool. It is the one piece of hard provenance a photograph from this camera can give you.None of that requires trusting a seller's number, which on an S2 Pro is the point: the count was never the available evidence here, so the inspection has to be.
If you also own a modern Fujifilm body, its RAF files answer the question in a second — these are the pages for them:
No. The tool reads Fujifilm counts from MakerNote tag 0x1438, a modern X-series field that is already absent from Fujifilm's own 2011–2013 X bodies. An S2 Pro RAF has no such tag, so the tool reports the EXIF it finds and the actuation field stays empty. No future parser update can change that on its own — the value is not in the file to be found.
Not from the file either. Its FujiFilm tag tables document no lifetime actuation counter. The similarly-named 0x1032 ExposureCount is the number of exposures combined into that single image, not a life total — and ImageCount, where it exists at all, carries ExifTool's note that it may reset to 0 when new firmware is installed.
Because the counter is written by the firmware into the manufacturer's own MakerNote, and these two cameras write different ones. Nikon's D100, announced in 2002 and based on the same F80 design, puts the count in Nikon tag 0x00A7 in every NEF. The S2 Pro writes a Fujifilm MakerNote with no counter in it. Sharing an ancestor gets you the same shutter mechanism, not the same metadata — and no Nikon tool can find a Nikon block that an S2 Pro never wrote.
Unpublished, and this page prints no number at all rather than guess one. Fujifilm rated nothing publicly, and there is no donor rating to inherit, because Nikon published none for the F80. The ~100,000 you will see quoted for the S5 Pro is the D200's rating and describes a different, higher-grade mechanism — see the section above for why transferring it here would be an invention.
Those are the symptoms Fujifilm described in its 4 October 2005 service advisory for this model, and it attributed them to the CCD rather than the shutter — a production-period inconsistency that could surface with use, storage conditions and age. A worn shutter looks different: uneven brightness across the frame or half-dark images at the fastest speeds. The advisory's free repair is long over, so treat the symptom as a reason to walk away from a purchase rather than as something to fix.
It resets DCF file numbering, which is the number people most often mistake for a shutter count. Since the S2 Pro records no actuation total in the first place, there is nothing else for a format to affect. Watch this one especially on this body: with a SmartMedia card and a CompactFlash card in the camera at once, file numbers prove even less than usual about total use.
The end-of-January 2002 announcement and the 3 August 2002 review date, the 6.1 MP effective / 6.17 M-photodiode Super CCD with diagonally oriented photodiodes at 23 × 15.5 mm in 3:2, the 4256 × 2848 maximum image size from interpolation to a 12 MP-equivalent output, the Nikon F mount on a modified Nikon F80 (N80) film body, the 30 s – 1/4000 s electronically controlled focal-plane shutter with X-contact flash sync to 1/125 s, approximately 2 fps for a maximum of 7 frames, ISO 100–1600, the SmartMedia (to 128 MB) and CompactFlash Type I/II Microdrive-compatible slots, the combination of four AA cells (NiMH recommended) with two CR123A / DL123A lithium cells, USB as a data-storage interface alongside IEEE 1394 FireWire for storage and computer-controlled shooting, the 92 % pentaprism viewfinder, the 1.8-inch 117,000-dot LCD, the 850 g weight including batteries and the 12-bit CCD-RAW output: DPReview's FinePix S2 Pro specification and review pages, together with the FinePix S2 Pro entry on Wikipedia, which is also the source for the camera's replacement by the FinePix S3 Pro. That the camera's RAW files are RAF and are read as such by independent software: LibRaw's supported-camera list and its FujiFilm metadata source, which match on the model string “S2Pro”. That RAF files from this body carry no lifetime actuation counter: ExifTool's FujiFilm MakerNote tables, in which no lifetime counter is documented, 0x1032 ExposureCount is defined as the number of exposures used for the current image and 0x1438 ImageCount carries the note that it may reset to 0 when new firmware is installed; the same tables are the source for 0x0010 InternalSerialNumber being unique for most models and containing the camera model ID and the date of manufacture, and ExifTool's MakerNote index is the source for the FinePix S2 Pro being listed under the FujiFilm MakerNote type. That tag 0x1438 is absent from Fujifilm's 2011–2013 X bodies (X100, X100S, X-Pro1, X-E1, X-S1, X10, XF1) is this site's own measurement, recorded in the Fujifilm RAF support matrix on the ShutterCount home page. The EXIF 2.3 origin of tag 0xA431 is from the EXIF specification as documented in ExifTool's EXIF table. That the Nikon D100 was announced in 2002 as a digital SLR based on the F80, while being Nikon's own body rather than a reused F80 shell: Nikon's D100 announcement as reported at the time and the Nikon D100 entry on Wikipedia. The service advisory of 4 October 2005 — its coverage of the FinePix S2 Pro, A303, F410 and F700; the completely black, purplish-cast and multi-coloured-distortion symptoms; the stated cause of a lack of uniformity in CCD quality during a certain production period combined with usage or storage conditions and age deterioration; the offer of free repair even after the one-year limited warranty had expired; and the US-import serial ranges 31A127–31A143, 32A000–32A039, 33A000–33A007 and 34A000–34A004 found on the bottom of the camera — is from DPReview's report of Fuji USA's advisory notice, dated 4 October 2005. No shutter-durability figure was found for the S2 Pro from Fujifilm, and none was found for the Nikon F80 from Nikon; no number is quoted here as a result, community shutter-life databases are described as self-reported collections rather than ratings and none of their figures is reproduced, and the ~100,000 actuations associated with the S5 Pro is identified throughout as Nikon's D200 rating rather than a figure applicable to this body. No RAF sample from this camera has been through the validation corpus and no RAF samples are bundled with the test suite, which is stated on the page rather than papered over. No in-camera actuation display could be confirmed, and no unverified service-menu button sequence is reproduced here.