Canon · Nikon · Sony · Fujifilm
🔒 No upload — 100% local

OM System OM-5 Mark II
Shutter Count: Check It Free

Drop an ORF file from your OM System OM-5 Mark II or use the camera menu method to get the exact shutter actuation count — file processing is entirely in your browser, never uploaded anywhere.

Check Shutter Count →

OM System OM-5 Mark II — Shutter Ratings

The OM System OM-5 Mark II (2024) is the updated version of the compact, weather-sealed mid-range Micro Four Thirds mirrorless camera. Featuring a 20 MP BSI CMOS sensor, IP53 dust and splash proofing (operating down to −10 °C), up to 7.5-stop IBIS, and a compact body designed for outdoor and travel photography, it is a strong choice for buyers seeking a robust all-weather mirrorless at a mid-range price point.

Model Release Sensor Est. Shutter Life RAW Format
OM System OM-5 Mark II 2024 20 MP MFT BSI CMOS ~150,000 ORF
OM System OM-5 2022 20 MP MFT BSI CMOS ~150,000 ORF
OM System OM-1 Mark II 2024 20 MP MFT stacked BSI CMOS 400,000 ORF
Note: OM System does not publish an official shutter rating for the OM-5 Mark II. The ~150,000 figure is a community estimate based on comparable mid-range MFT bodies. OM-5 Mark II users focused on travel, hiking, and nature photography typically accumulate counts more slowly than event or sports photographers.

How to Check Shutter Count on the OM System OM-5 Mark II

The OM System OM-5 Mark II uses ORF (Olympus RAW File) format. Unlike Canon CR3 or Sony ARW files, ORF shutter count embedding is not confirmed for all firmware versions. Two methods are available:

Method 1: Camera menu (recommended)

  1. Power on the OM-5 Mark II.
  2. Press MENU and navigate to the Setup Menu (wrench icon).
  3. Scroll to find the shutter count display (location varies by firmware — check the last page of the Setup menu if not immediately visible).
  4. The total mechanical shutter count is displayed on screen.

Method 2: ORF file via ShutterCount

  1. Take a photo in RAW mode and locate the resulting .ORF file.
  2. Open shuttercount.app in any modern browser.
  3. Drag the ORF file onto the drop zone.
  4. If the shutter count is embedded in the ORF MakerNote for your firmware version, it will be displayed. If not, the camera menu method is required.
ORF shutter count caveat: OM System (Olympus) ORF files do not reliably embed the shutter count in a confirmed standard tag. ShutterCount will attempt to read available MakerNote fields, but the camera menu method is the most reliable approach for OM-5 Mark II bodies.

What Is a Good Shutter Count for a Used OM System OM-5 Mark II?

Actuation Count % of Est. Life Assessment
0 – 10,000 0 – 7 % Very low use — near new condition
10,000 – 40,000 7 – 27 % Low use — substantial life remaining
40,000 – 80,000 27 – 53 % Moderate use — normal for active outdoor use
80,000 – 120,000 53 – 80 % High use — inspect carefully; check seals and LCD
120,000 + 80 %+ Near est. limit — factor in potential shutter service

For a weather-sealed outdoor camera like the OM-5 Mark II, also inspect the weather seals around ports and the battery compartment, the LCD for scratches, and verify the tilt-and-swivel mechanism operates smoothly.

OM System OM-5 Mark II vs OM-5 — What Changed?

The OM-5 Mark II (2024) builds on the original OM-5 (2022) with these key improvements:

The sensor (20 MP MFT BSI CMOS), weather sealing (IP53), body dimensions, and shutter mechanism are essentially unchanged from the original OM-5.

OM System OM-5 Mark II Shutter Count — FAQ

How do I check the shutter count?

The most reliable method is via Menu → Setup → shutter count display on the camera. You can also drop an ORF RAW file into shuttercount.app — the tool will attempt to extract the count from EXIF MakerNote data if embedded by your firmware.

What is the rated shutter life?

OM System does not publish an official rating. The estimated lifespan is approximately 150,000 actuations.

Does the electronic shutter affect the count?

No. The OM-5 Mark II supports a fully electronic shutter mode. Electronic shutter exposures do not actuate the mechanical curtain and do not increment the mechanical shutter count. The Handheld High-Res Shot mode (which composites multiple frames) uses the mechanical shutter for each sub-frame — be aware that this mode increments the count more rapidly.

Is ShutterCount free to use?

Yes, completely free. ShutterCount.app processes your file locally in the browser. No account, no upload, no limit on files.

Other OM System & MFT Cameras