How do I check the shutter count of my Olympus Tough TG-1?

The Olympus Tough TG-1 does not support RAW file capture, so ShutterCount cannot read the count from a file. Use the camera menu instead: go to MENU → Setup (wrench icon) → Camera Information. The display shows the cumulative shutter release count for the body.

What is the expected shutter life of the Olympus Tough TG-1?

Olympus has not published an official shutter rating for the TG-1. Based on its compact class positioning and community data, approximately 100,000 actuations is the commonly accepted estimate. Heavily used outdoor or dive bodies can accumulate counts quickly.

What is a good shutter count when buying a used Olympus TG-1?

Under 5,000 is excellent for a used TG-1; 5,000–20,000 represents normal recreational use; 20,000–50,000 suggests active outdoor or dive use; above 70,000 inspect carefully and negotiate accordingly. Always check the rubber port seals and battery contacts on this now-vintage body.

How does the TG-1 differ from the TG-2?

The Olympus Tough TG-2 (2013) improved the TG-1 (2012) primarily by increasing the waterproof depth rating from 12 metres to 15 metres and adding a GPS sensor. Both cameras share the same 12 MP 1/2.3" sensor, f/2.0 lens, and 1080p video capability. The TG-2 also introduced a temperature sensor. Neither model supports RAW file capture.

Is the Olympus TG-1 still worth buying?

The TG-1 was released in 2012 and represents a vintage rugged compact. Its f/2.0 lens and 12-metre waterproofing remain impressive for its era. At a suitably low used price it can serve as a dive or adventure backup, but battery availability and ageing rubber seals are the primary concerns on a body over a decade old.

🔒 No upload — 100% local

Olympus Tough TG-1 Shutter Count:
How to Check It Free

The Olympus Tough TG-1 does not support RAW file capture, so shutter count cannot be read from a file. Follow the camera menu steps below — no software, no upload, and no account required.

Check Shutter Count →

Olympus Tough TG-1 — About the Shutter

The Olympus Tough TG-1 (2012) is the first-generation model of Olympus’ legendary rugged compact series. It is built around a 12 MP 1/2.3” BSI CMOS sensor with a fixed Zuiko 25–100mm f/2.0 lens (4× zoom), housed in an IP68 waterproof body rated to 12 metres depth, shockproof to 2.0 m, freeze-proof to −10°C. The TG-1 records JPEG only — RAW (ORF) support was introduced later in the TG series.

Model	Release	Sensor	Est. Shutter Life	RAW Format
Olympus Tough TG-1	2012	12 MP 1/2.3” BSI CMOS	~100,000	None (JPEG only)
Olympus Tough TG-2	2013	12 MP 1/2.3” BSI CMOS	~100,000	None (JPEG only)
Olympus Tough TG-3	2014	16 MP 1/2.3” BSI CMOS	~100,000	None (JPEG only)
Olympus Tough TG-4	2015	16 MP 1/2.3” BSI CMOS	~100,000	ORF

No RAW support: The TG-1 shoots JPEG only and does not embed a shutter counter in any output file. Use the camera menu method described below to read the actuation count.

How to Check Shutter Count on the Olympus Tough TG-1

Because the TG-1 does not produce RAW files, the only method to read the shutter count is via the camera menu.

Camera Menu Method

Power on the TG-1 and press the MENU button.
Navigate to the Setup Menu (the wrench icon, last tab).
Scroll down and select Camera Information.
The display shows the total cumulative shutter release count for this body.

All reading happens on-device. The count shown is the permanent hardware lifetime total.

What Is a Good Shutter Count for a Used Olympus TG-1?

The TG-1 was aimed at outdoor adventurers, divers, and travellers. Bodies used intensively may have high counts; casual backup cameras can show very low counts despite their age (the TG-1 is now over a decade old).

Actuations	Assessment
0 – 3,000	Barely used — essentially new
3,000 – 10,000	Light use — excellent condition
10,000 – 30,000	Normal recreational use — good condition
30,000 – 60,000	Active outdoor/dive use — inspect carefully
60,000 – 100,000	Heavy use — budget for potential service
100,000 +	Beyond estimated life — only at a very low price

    Buying a used TG-1: beyond the shutter count, always inspect the rubber port seals for cracking (a common age failure on vintage TG bodies), check the battery contacts for corrosion, and verify the 12-metre waterproofing is intact before any dive use. The TG-1 uses a proprietary Li-92B battery; check availability before purchasing.
  

Olympus Tough TG-1 Shutter Count — FAQ

How do I check the shutter count of my Olympus TG-1?

Go to MENU → Setup (wrench) → Camera Information. The TG-1 does not support RAW files, so the camera menu is the only available method.

What is the waterproof rating of the TG-1?

The Olympus Tough TG-1 is rated to 12 metres depth under the IPX8 standard — slightly less than the 15 m of the TG-2 onwards. For recreational snorkelling or surface dive use it is sufficient; for deeper freediving a dedicated housing is recommended.

What replaced the TG-1?

The Olympus Tough TG-2 (2013) is the direct successor, extending the waterproof depth to 15 m, adding a GPS sensor and temperature sensor while keeping the same f/2.0 lens. The current model in the line is the OM System Tough TG-7 (2023).

Can the shutter count be reset on the TG-1?

Only an authorised service centre can reset the internal hardware counter after a mechanical component replacement. The counter shown in the camera menu is the permanent lifetime total and cannot be altered by the user.

Olympus Tough TG-1 Shutter Count:How to Check It Free