How do I check the shutter count of my Olympus Tough TG-2?

The Olympus Tough TG-2 does not support RAW file capture, so ShutterCount cannot read the count from a file. Use the camera menu instead: go to MENU → Setup (wrench icon) → Camera Information. The display shows the cumulative shutter release count for the body.

What is the expected shutter life of the Olympus Tough TG-2?

Olympus has not published an official shutter rating for the TG-2. Based on its compact class positioning and community data, approximately 100,000 actuations is the commonly accepted estimate. Heavily used outdoor or dive bodies can accumulate counts quickly.

What is a good shutter count when buying a used Olympus TG-2?

Under 5,000 is excellent; 5,000–20,000 represents normal recreational use; 20,000–50,000 suggests active outdoor or dive use; above 70,000 inspect carefully and negotiate accordingly. Always check the rubber port seals and verify the 15-metre waterproofing rating is intact.

How does the TG-2 differ from the TG-1 and TG-3?

The TG-2 (2013) improved on the TG-1 (2012) by increasing waterproof depth from 12 m to 15 m, adding a GPS sensor and temperature sensor, while keeping the same 12 MP sensor and f/2.0 lens. The TG-3 (2014) then upgraded the sensor to 16 MP and added Wi-Fi connectivity. Neither TG-1, TG-2 nor TG-3 supports RAW file capture.

Is the Olympus TG-2 still worth buying?

The TG-2 (2013) is a vintage rugged compact over a decade old. Its f/2.0 lens and 15-metre waterproofing are solid for recreational dive or outdoor use at low cost. The primary concerns are ageing rubber port seals and battery availability — the Li-92B is still manufactured. Verify all seals before any dive use.

🔒 No upload — 100% local

Olympus Tough TG-2 Shutter Count:
How to Check It Free

The Olympus Tough TG-2 does not support RAW file capture, so shutter count cannot be read from a file. Follow the camera menu steps below — no software, no upload, and no account required.

Check Shutter Count →

Olympus Tough TG-2 — About the Shutter

The Olympus Tough TG-2 (2013) is the second generation of Olympus’ TG rugged compact series. It improved on the TG-1 by extending waterproof depth from 12 m to 15 metres and adding a built-in GPS and temperature sensor. The 12 MP 1/2.3” BSI CMOS sensor and the signature 25–100mm f/2.0 lens (4× zoom) remained unchanged. Like its predecessor, the TG-2 captures JPEG only — no RAW (ORF) support.

Model	Release	Sensor	Est. Shutter Life	RAW Format
Olympus Tough TG-1	2012	12 MP 1/2.3” BSI CMOS	~100,000	None (JPEG only)
Olympus Tough TG-2	2013	12 MP 1/2.3” BSI CMOS	~100,000	None (JPEG only)
Olympus Tough TG-3	2014	16 MP 1/2.3” BSI CMOS	~100,000	None (JPEG only)
Olympus Tough TG-4	2015	16 MP 1/2.3” BSI CMOS	~100,000	ORF

No RAW support: The TG-2 shoots JPEG only and does not embed a shutter counter in any output file. Use the camera menu method described below to read the actuation count.

How to Check Shutter Count on the Olympus Tough TG-2

Because the TG-2 does not produce RAW files, the only method to read the shutter count is via the camera menu.

Camera Menu Method

Power on the TG-2 and press the MENU button.
Navigate to the Setup Menu (the wrench icon, last tab).
Scroll down and select Camera Information.
The display shows the total cumulative shutter release count for this body.

All reading happens on-device. The count shown is the permanent hardware lifetime total.

What Is a Good Shutter Count for a Used Olympus TG-2?

The TG-2’s 15-metre waterproofing and built-in GPS made it popular for adventure and underwater photography. Bodies used for snorkelling or diving accumulate counts quickly; indoor-use backup cameras may have very low counts despite their age.

Actuations	Assessment
0 – 3,000	Barely used — essentially new
3,000 – 10,000	Light use — excellent condition
10,000 – 30,000	Normal recreational use — good condition
30,000 – 60,000	Active outdoor/dive use — inspect carefully
60,000 – 100,000	Heavy use — budget for potential service
100,000 +	Beyond estimated life — only at a very low price

    Buying a used TG-2: inspect the rubber port seals for cracking, check battery contacts for corrosion, and test all ports (USB, DC-in, HDMI). The GPS antenna draws power even when off — a battery that drains faster than expected may indicate a GPS fault. Always verify the 15-metre waterproof rating before any dive use.
  

Olympus Tough TG-2 Shutter Count — FAQ

How do I check the shutter count of my Olympus TG-2?

Go to MENU → Setup (wrench) → Camera Information. The TG-2 does not support RAW files, so the camera menu is the only available method.

Does the TG-2 GPS affect battery life?

Yes — the GPS sensor in the TG-2 draws background power. Disable GPS when not needed via the GPS menu to preserve battery life. This is a common concern on bodies where the GPS toggle has been left enabled through years of storage.

What replaced the TG-2?

The Olympus Tough TG-3 (2014) is the direct successor, upgrading the sensor to 16 MP and adding Wi-Fi connectivity, while maintaining the same f/2.0 lens and 15-metre waterproofing. The current model is the OM System Tough TG-7 (2023).

Can the shutter count be reset on the TG-2?

Only an authorised service centre can reset the internal hardware counter after a mechanical component replacement. The counter shown in the camera menu is the permanent lifetime total and cannot be altered by the user.

Olympus Tough TG-2 Shutter Count:How to Check It Free