How do I check the shutter count of my Olympus Tough TG-3?

The Olympus Tough TG-3 does not support RAW file capture, so ShutterCount cannot read the count from a file. Use the camera menu instead: go to MENU → Setup (wrench icon) → Camera Information. The display shows the cumulative shutter release count for the body.

What is the expected shutter life of the Olympus Tough TG-3?

Olympus has not published an official shutter rating for the TG-3. Based on its compact class positioning and community data, approximately 100,000 actuations is the commonly accepted estimate. Heavily used outdoor or dive bodies can accumulate counts quickly.

What is a good shutter count when buying a used Olympus TG-3?

Under 5,000 is excellent; 5,000–20,000 represents normal recreational use; 20,000–50,000 suggests active outdoor or dive use; above 70,000 inspect carefully and negotiate accordingly. Always check rubber port seals and test Wi-Fi and GPS before purchasing.

How does the TG-3 differ from the TG-2 and TG-4?

The TG-3 (2014) upgraded the sensor from 12 MP (TG-2) to 16 MP and added Wi-Fi connectivity — a first for the TG series. It retained the same f/2.0 lens and 15-metre waterproofing as the TG-2. The TG-4 (2015) then added RAW (ORF) file support and a built-in focus stacking system. Neither TG-2 nor TG-3 supports RAW.

Is the Olympus TG-3 still worth buying?

The TG-3 (2014) offers the same 15-metre waterproofing and f/2.0 lens as its successors at a lower used price. Its main limitations versus later models are the absence of RAW support and 4K video. At the right price it makes a capable dive or adventure backup — inspect the Wi-Fi antenna seal and rubber port covers carefully.

🔒 No upload — 100% local

Olympus Tough TG-3 Shutter Count:
How to Check It Free

The Olympus Tough TG-3 does not support RAW file capture, so shutter count cannot be read from a file. Follow the camera menu steps below — no software, no upload, and no account required.

Check Shutter Count →

Olympus Tough TG-3 — About the Shutter

The Olympus Tough TG-3 (2014) is the third-generation rugged compact in the TG series. It stepped up the sensor from 12 MP to 16 MP and added Wi-Fi connectivity for the first time in the TG lineup. The same 25–100mm f/2.0 fixed lens (4× zoom), IP68 waterproofing to 15 metres, GPS, and temperature sensor were carried over from the TG-2. The TG-3 shoots JPEG only — RAW (ORF) support arrived with the TG-4 in 2015.

Model	Release	Sensor	Est. Shutter Life	RAW Format
Olympus Tough TG-2	2013	12 MP 1/2.3” BSI CMOS	~100,000	None (JPEG only)
Olympus Tough TG-3	2014	16 MP 1/2.3” BSI CMOS	~100,000	None (JPEG only)
Olympus Tough TG-4	2015	16 MP 1/2.3” BSI CMOS	~100,000	ORF
Olympus Tough TG-5	2017	12 MP 1/2.3” BSI CMOS	~100,000	ORF

No RAW support: The TG-3 shoots JPEG only and does not embed a shutter counter in any output file. Use the camera menu method described below to read the actuation count.

How to Check Shutter Count on the Olympus Tough TG-3

Because the TG-3 does not produce RAW files, the only method to read the shutter count is via the camera menu.

Camera Menu Method

Power on the TG-3 and press the MENU button.
Navigate to the Setup Menu (the wrench icon, last tab).
Scroll down and select Camera Information.
The display shows the total cumulative shutter release count for this body.

All reading happens on-device. The count shown is the permanent hardware lifetime total.

What Is a Good Shutter Count for a Used Olympus TG-3?

The TG-3 targets outdoor and dive photographers. Its Wi-Fi added remote shooting appeal, and its GPS logging means some owners used it intensively on expeditions. Count accumulation rate depends heavily on use case.

Actuations	Assessment
0 – 3,000	Barely used — essentially new
3,000 – 10,000	Light use — excellent condition
10,000 – 30,000	Normal recreational use — good condition
30,000 – 60,000	Active outdoor/dive use — inspect carefully
60,000 – 100,000	Heavy use — budget for potential service
100,000 +	Beyond estimated life — only at a very low price

    Buying a used TG-3: inspect the rubber port seals and Wi-Fi antenna cover for cracking, test Wi-Fi connectivity and GPS lock, check battery contacts, and verify the macro lens system for fungus or condensation. The TG-3’s 16 MP sensor makes its JPEG output sharper than TG-2 at equivalent settings.
  

Olympus Tough TG-3 Shutter Count — FAQ

How do I check the shutter count of my Olympus TG-3?

Go to MENU → Setup (wrench) → Camera Information. The TG-3 does not support RAW files, so the camera menu is the only available method.

Does the TG-3 support 4K video?

No — the TG-3 records up to 1080p at 60fps (NTSC) or 50fps (PAL). 4K video was introduced in the Olympus Tough TG-5 (2017). If 4K is a requirement, consider a TG-5 or later body.

What replaced the TG-3?

The Olympus Tough TG-4 (2015) added RAW (ORF) file support and a built-in focus-stacking mode, while keeping the same 16 MP sensor and 15-metre waterproofing. The current model is the OM System Tough TG-7 (2023).

Can the shutter count be reset on the TG-3?

Only an authorised service centre can reset the internal hardware counter after a mechanical component replacement. The counter shown in the camera menu is the permanent lifetime total and cannot be altered by the user.

Olympus Tough TG-3 Shutter Count:How to Check It Free